Universal Testing Machine

En 10002-2 standart

Universal hydraulic tensile test machine is designed to test the ferrous materials for structural values such as
Breaking point, breaking tensile, maximum load and maximum tensile. Apart from tensile tests, universal test machines
Can also be used for standard test such as flexure and compression tests up to the capacity of the device.
Universal test machines are produced in two different models having 40 and 60 ton capacities.
Maximum security is maintained by movement limiters on the lower jaw and piston as well as the safety check valves
On the hydraulic system.
Hydraulic power unit works silently.
0 to 50mmdia samples can be tested with a user friendly jaws that comply with all standards.
Load cell is used for load measurements.
Sample holder jaws are of hydraulic power type.
Strain measurement can be done by the electronic displlacment transducer built in the machine or external
Extensometer fitted to the specimen.
Strain measurements can ben done directly from the extemsometer fitted to the specimen.
Tests can be done fully automatic by computer. Machine make the test with the set pace rate and turns to start
Position automatically.
The distance between the grips can be set by motor driven hand set system.

Technical specifications
Capacity:600 kn
Load measurement: +/- %1 astm e4, en 10002-2
Stretch measurement sensitivity:0.01mm
Vertical test distance:60 mm min.:500 mm max.
Piston stroke value:250 mm
Working pressure:300 bar
Power requirement:220 v 50-60 hz.