Compression Machines

Machines have EN 12390-4, BS 1881:115, ASTM C-39 standarts.

General Properties:
1) Full automatic digital controlled with computer accessibility at the same time. Breaks the sample with the set pace rate via the digital unit or the test software and returns to start position automatically. The pace rate can be set between 0.5- 25kN/min with an accuracy of +/-5%.
2) Testers are manufactured in the range of 300 kN - 5000 kN capacities. The standard models are of 1150
KN,2000 kN and 3000 kN capacity.
3) Suitable for testing 50mm,100mm,150mm and 200mm cube samples as well as cylinder samples with 75-160mm diameter and 150-320mm height.
4) All models have a rapid approach pump unit that enables the piston to rise at a rate of 100-150 mm/min
Until loading start on the sample.
5) Pressure safety valve, piston limit switch, removable front and rear gates are standard in all models.
6) Upper compression platens have ball seating assembly for movement in all models. All compression platens have a surface hardness of 55 HRC.
7) Required distance pieces for vertical test distance and sample dimensions are supplied in all models.
8) Pressure transducer with a sensitivity of % 0.3 is used for load measurements.
9) All models operate with 220-240 VAC,50 60 Hz,1 phase mains power.